Bette Baths

Who Are Bette Baths?corrode but is fully recyclable.
Bette are a German company. Established in 1952Bette - Huge Range of Standard Baths
Bette Baths is one of the leading names in stateBette manufacture a huge range of baths with
of the art steel/enamel technology being one ofwell over 60 basic models, each of these models
the three main manufacturers of this technologymay be available in a number of sizes (for
in Europe. Bette continues to develop their basicexample the Bette Form is available in 12 sizes
technologies and the breadth of the application offrom 140 x 70 to 190 x 80cm) and may have
those technologies within the bathroom industry.many optional extras including anti slip surfaces,
Including their new range of showering productshand grips, tap holes and the Bette glaze premium
Bette now produce around 500 different models.finish. In addition baths are available in over 1000
Steel Bathsdifferent colours, many of these at relatively low
Panel-in non freestanding baths are most oftenextra cost. The range of baths available is
made from acrylic. Where good quality acrylicmatched by a range of prices varying from
used this is a perfectly good solution. Althougharound the £200 mark to several thousand
some people do not like acrylic because theypounds. This means that even in a modestly
consider it to be plastic, very similar materials arebudgeted bathroom it is possible to have one of
used on very high end prestige products such asthese baths of extra special quality.
top of the range sports car bodies and so thinkingBette - Small Range of Freestanding Baths
of it as cheap and plastic may not always be aBette also uses the same steel and enamel
fair characterisation of it. However if you wanttechnology to manufacture a small selection of
this kind of bath but you want something a cutfreestanding baths. The Bette Clou is a double
above quality-wise, better in terms of bothended freestanding bath on feet, available in 3
materials and construction, with a long life, tough,sizes and suited to either a traditional or
with a luxury look, touch and feel then there is ancontemporary setting. The Bette Combo is a
alternative. This alternative is steel and enamel.contemporary double ended bath that stands on a
Bette use a titanium steel, a highly ductile alloy,chrome frame. Finally the Bette Roma is a classic
that is formed into the 2.5mm thick 'Super Steel'single ended freestanding bath which also available
that is the basis of Bette's main ranges of baths.as a built in version.
Vitreous Enamel SurfaceCool New Bath Stuff by Bette
The vitreous enamel coating that is permanentlyBette also do a few really neat and chic bathroom
bonded to the steel body of a Bette bath is aextras, For example the Bette spring tap can be
type of glass. The thinner and more evenly thefitted to the Bette baths with 90mm wastes, it
glass can be applied to the surface, the morefills the bath from the waste with water bubbling
stable it becomes. Over years of developmentup as if from a spring. Its also much quieter than
Bette have designed an exclusive process thatthe usual kind of bath tap. Also the Bette Gerberit
achieves a maximum level of quality with aClou invisible waste operates by emptying through
minimum level of glaze - which means noa hidden duct coming from around the waste, the
scratches, no chipping and no problems withresult is a bath with no separate overflow hole
strong cleaning products or other aggressivebut that cannot be filled to closer than 60mm
agents. Vitreous enamel has none of thefrom the top edge of the bath. Fantastic bits of
plastic-like qualities of acrylic and will not stain orkit for the most contemporary minimalist
discolour in sunlight like stone cast resin. It will notbathrooms.